Can I Build Shed in Asheville, NC? (2026)
Find out if you can build a shed in Asheville, NC. Rules, permit requirements, costs, and next steps.
You can build a shed in Asheville, NC. Whether a permit is required depends on whether you need a permit.
Sheds and storage buildings in Asheville, NC govern accessory storage structures. The Asheville Planning and Development — Permits and Inspections enforces building permit requirements for shed projects. The key factor determining whether you need a permit is whether you need a permit.
Shed Rules in Asheville
Shed Rules in Asheville: Permit required: Conditional. When permit is required: Permit not required for structures under 200 sqft with no utilities on level ground. Sheds over 200 sqft or with electrical/plumbing require building permit. Must comply with setback requirements in Asheville UDO. Steep-slope overlay may impose additional foundation requirements on sloped lots.
Costs & Fees
Shed permit fees in Asheville: $150-$400.
Timeline
2-4 weeks
Next Steps
Next steps for building a shed in Asheville: 1. Verify whether your project meets the permit threshold. 2. If a permit is required, contact the Asheville Planning and Development — Permits and Inspections at (828) 259-5845 or https://www.ashevillenc.gov/department/development-services/inspections/. 3. Submit plans and pay applicable fees. 4. Schedule required inspections through the Asheville Planning and Development — Permits and Inspections.
Asheville Planning and Development — Permits and Inspections
Phone: (828) 259-5845
Website: https://www.ashevillenc.gov/department/development-services/inspections/
Online Permits: https://egov.ashevillenc.gov/
Frequently Asked Questions
Can I build an ADU in Asheville?
Yes. North Carolina House Bill 488 (effective October 1, 2023) requires Asheville to allow ADUs by-right on all residential lots. You can build a detached or attached ADU up to 1,200 sqft. No owner-occupancy requirement applies. Asheville's UDO incorporates these ADU allowances. Note that mountain terrain may affect site feasibility — steep-slope overlay standards and creek buffer setbacks apply on many Asheville lots. Historic district properties require a Certificate of Appropriateness before permits are issued.
What does North Carolina HB 488 require for ADUs in Asheville?
NC HB 488 (2023) requires municipalities with over 10,000 population (including Asheville) to allow ADUs by-right on all residential lots. Key protections: municipalities cannot require more than 1 parking space per ADU, cannot require owner-occupancy, and must approve code-compliant ADU applications ministerially. Asheville's UDO reflects these requirements, though local standards (setbacks, lot coverage, height) still apply.
How did Hurricane Helene affect building permits and floodplains in Asheville?
Hurricane Helene (September 2024) caused catastrophic flooding in Buncombe County, particularly along the French Broad River, Swannanoa River, and Cane Creek. FEMA is conducting floodplain remapping that may expand regulated flood zones. Before planning construction near any waterway, verify current floodplain status with Asheville Stormwater Services. Some emergency repair permits may have streamlined processing for Helene-damaged properties — contact Planning and Development for current status.
Are there special rules for building in Asheville's historic districts?
Yes. Asheville has four locally-designated historic districts: Montford, Chestnut Hill, Kimberly Avenue, and Albemarle Park. Properties within these districts require a Certificate of Appropriateness from the Historic Resources Commission before exterior alterations, additions, or new construction — including ADUs. The review focuses on compatibility with the district's historic character. Contact Asheville Planning and Development's Historic Preservation staff before designing any project in a historic district.
Does mountain terrain affect building permits in Asheville?
Yes, significantly. Asheville's steep terrain affects many aspects of residential construction: the steep-slope overlay standard applies to lots with slopes exceeding 15%, requiring modified grading and foundation approaches; stream and creek buffer setbacks (25-50 ft from top of bank) restrict construction near waterways; ridgeline protection standards limit development on prominent ridge tops; and driveway grades over 20% require engineering review. Many older hillside neighborhoods have established patterns of stepped foundations and retaining walls that inform design expectations.
Source: Asheville Planning and Development — Permits and Inspections — Building Regulations. Last verified April 6, 2026. View source